Форум проекта 2micom.ru
Общий раздел => Обсуждение статей => Тема начата: raja36 от 11 Сентябрь 2014, 18:19:54
-
Hi,
When i read a master ic using UOC TDA93xx / TDA95xx
Error happen
please help me
Error image :
https://drive.google.com/file/d/0B139a-ZycZW4aVRRLWh1Wk16Vm8/edit?usp=sharing
-
The errors can appear because of too long wires between IC's and LPT-connector. The wires must be shorter than 100mm. Common wire must be the shortest if possible.
Maybe you forgot to add some resistors and capacitors. They all must be set!
Also it will be better to connect the jig just to computer without cable.
-
I have another one doubt.
This program is enough to write a clean IC(TDA 93XX)?
-
Кабель питания слишком длинный между разъемом IC и LPT. У меня была такая же проблема.
-
Я тоже был как ты. Попросите ваше решение. Это очень помогло мне.
-
This program is enough to wnnector. The wires must be shorter