Автор Тема: UOC TDA93xx / TDA95xx programmer read error  (Прочитано 5679 раз)

raja36

  • Участники
  • **
  • Сообщений: 7
UOC TDA93xx / TDA95xx programmer read error
« : 11 Сентябрь 2014, 18:19:54 »
Hi,
              When i read a master ic using UOC TDA93xx / TDA95xx
Error happen


please help me

Error image :
https://drive.google.com/file/d/0B139a-ZycZW4aVRRLWh1Wk16Vm8/edit?usp=sharing
« Последнее редактирование: 11 Сентябрь 2014, 18:33:24 от raja36 »

AMF-M

  • Пользователь
  • **
  • Сообщений: 79
Re: UOC TDA93xx / TDA95xx programmer read error
« Ответ #1 : 12 Сентябрь 2014, 00:57:47 »
The errors can appear because of too long wires between IC's and LPT-connector. The wires must be shorter than 100mm. Common wire must be the shortest if possible.
Maybe you forgot to add some resistors and capacitors. They all must be set!
Also it will be better to connect the jig just to computer without cable.
« Последнее редактирование: 12 Сентябрь 2014, 01:08:55 от AMF-M »

raja36

  • Участники
  • **
  • Сообщений: 7
Re: UOC TDA93xx / TDA95xx programmer read error
« Ответ #2 : 12 Сентябрь 2014, 08:20:36 »
I have another one doubt.
This program is enough to write a clean IC(TDA 93XX)?

loganjohn123

  • Новичок
  • *
  • Сообщений: 2
Re: UOC TDA93xx / TDA95xx programmer read error
« Ответ #3 : 04 Январь 2018, 09:46:37 »
Кабель питания слишком длинный между разъемом IC и LPT. У меня была такая же проблема.

Magcanut

  • Новичок
  • *
  • Сообщений: 2
Re: UOC TDA93xx / TDA95xx programmer read error
« Ответ #4 : 20 Февраль 2018, 05:18:56 »
Я тоже был как ты. Попросите ваше решение. Это очень помогло мне.

Katybuy

  • Новичок
  • *
  • Сообщений: 2
Re: UOC TDA93xx / TDA95xx programmer read error
« Ответ #5 : 23 Август 2018, 07:07:58 »
This program is enough to wnnector. The wires must be shorter